Crossport Systems Pivio Manual de Instruções descarregar pdf (Página 37)

Timer Settings and Adjustment

Remove cover to access the timer. The Pause time is set by the blue rotary switch

The pump on-time is set by the red rotary switch

Timer Operation

1. The LED marked “battery” lights when power is applied to the PC board.

2. The LED marked “motor” lights when pumping lubricant.

3. Depressing pushbutton for 2 seconds will initiate a manual lube event.

4. Off timer rotary switch, can be adjusted to 15 values, (do not set to “0” )

5. On time rotary switch, can be adjusted to 15 values, (do not use “0” )

IMPORTANT: Do not use the zero position located on the ON or Off timer switch.

Rotary Switch

Values

Switch Position

Pause Time (Hours)

Switch Position

Time (Minutes)

Timer Setting

For the Case Sprayer, set the Pause Time for one hour (switch position “1”) and the On-Time for 6

minutes (Switch Position 3)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Sem comentários

Crossport Systems Pivio Manual de Instruções Página 37