Crossport Systems Pivio Manual de Instruções descarregar pdf (Página 35)

Pump Wiring Detail

Continue routing electrical into the cab via the

access panel.

Pull harness through the bottom of the cab and

route to fuse panel on left side of machine

underneath the passenger seat.

Combine red and blue wires from the harness and

connect to the seat fuse via an “add a circuit” or

similar device. Fuse the pump for 7.5 amps.

Connect white wire from the harness to the

ground lug inside the fuse box. The lug is located

on the bottom of the box.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 44 45

Sem comentários

Crossport Systems Pivio Manual de Instruções Página 35